$70.00

TB6AC AC/DC 50W/5A Dual Power Balancing Charger
[TN329-4B6]

TB6AC AC/DC 50W/5A Dual Power Balancing Charger
Product Description:

Tenergy TB6AC Dual Power Balancing Charger (with built-in AC Adapter) is one of today's most advanced type of smart charger. The TB6AC can accept three types of Lithium batteries - LiIo, LiPo and LiFe. It offers additional Lithium programming. Fast charge reduces the charging time of the Lithium battery and the Storage mode controls the final voltage of the battery to be suited for extended storage. The charger also features an LCD display and the Durable High-quality aluminum case aids in cooling the charger during the charging cycle.

A Multi-Charging Harnesses "Octopus" for TB6/TB6B/TB6AC Balancing Chargers (A $10.99 Value), is included for FREE!

    The Included Charging Harness has the following connectors:
  • Traxxas
  • Tamiya
  • Mini Tamiya
  • JST
  • Hitec
  • EC3
  • Deans
    Features:
  • Operating voltage: DC 11~18 volts
  • Charge power: max. 50 Watts
  • Discharge power: max. 5 Watts
  • NiCd/MH: 1~15 cells
  • LiIo/LiPo/LiFe: 1~6 series
  • Pb: 2~20V
  • Charge current: 0.1 to 5.0A
  • Discharge current: 0.1 to 1.0A
  • No. of cycle: 1 to 5 times
  • Battery data memory: up to 5 data
  • Weight: 585g
  • Dimension: 140*148*45mm
  • Temperature sensor port
  • Built in AC adapter

The smart charger employs a circuit that has maximum output power of 50W. As a result, the smart charger can charge or discharge up to 15 cells of NiCd/NiMH and 6 series of Lithium batteries with maximum current of 5.0A.

Built into the smart charger is an individual-cell-voltage balancer. No external balancer is needed when charging

The smart charger also can monitor and balance individual cells of the Lithium battery pack during the discharge process, as well as the charge process. If the voltage of any one cell varies abnormally, the process will be stopped with the error message.

The smart charger can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry, such as minimum, maximum, and charge termination voltages.

The smart charger offers additional Lithium programming. Fast charge reduces the charging time of the Lithium battery and the Storage mode controls the final voltage of the battery to be suit for long time storage.

Data for the different batteries programs can be stored and retrieved. This data files can be retrieved at any time you need them without reprogramming.

The smart charger can perform 1 to 5 cycles of charge>discharge or discharge>charge for battery break in/refreshing and balancing.

Warnings:

Never leave the charger unattended when it is connected to its power supply. If any malfunction is found, terminate the process at once and refer to the operation manual.
Keep the charger well away from dust, damp, rain, heat, direct sunlight and vibration. Don't drop charger!
The allowable input voltage is 11~15V DC.
This charger and the battery should be put on a heat-resistant, non-inflammable and non-conductive surface. Never place them on a car seat, carpet or similar. Keep all the inflammable volatile materials away from operating area.
Make sure you know the specifications of the battery to be charged or discharged to ensure it meets the requirements of this charger. If the program is set up incorrectly, the battery and charger may be damaged. It can cause fire or explosion due to overcharging. This warranty is not valid for any damage or subsequent damage arising as a result of a misuse or failure to observe the procedures outlined in this manual.
To avoid short circuit between the charge lead always connect the charge cable to the charger first, then connect the battery. Reverse the sequence when disconnecting.

Reviews

Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Manufacturer Info
Other products