The DJI NAZA V2 is a lightweight multi-axis control platform specially designed for the multi-rotor enthusiast. The NAZA is a small all-in-one module that includes a flight controller, gyroscopes, accelerometers and barometer. The Naza has D-Bus support that will allow it to interface with any radio having D-Bus support. The controler also features upgradeable firmware and an expansion port for adding additional peripherals.
Features of the DJI Naza Controller:
- NAZA V2
- GPS Unit
- LED W/USB Connection
- USB Cable
- Connection Cables
DJI adheres to continuous innovating and improving, with the new firmware, new attitude stabilization algorithm and optimized hardware structure, the Naza-M V2 provides better flight performance. The innovative All-in-one design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude, attitude and therefore can be used for autopilot/automatic control.
Independent PMU with amazing function extension
The Naza PMU V2 has enhanced BEC functionality and provides extendable CAN BUS ports, which can support iOSD, Zenmuse H3-2D gimbal (pitch control). Support is also included for optional Bluetooth LED module to allow parameter adjustment via a mobile APP (future firmware upgrade required for this functionality)
Advanced & Improved Attitude Stabilization Algorithm:
The latest fourth generation attitude stabilization algorithm not only inherits the outstanding flight stability of DJI products, but also provides excellent maneuverability even without the GPS module. It is more flexible and stable, and gives the hobbyists a wonderful flight experience. New features have been included such as GPS course automatic compensation, GPS & Compass sensor calibration, new take-off mode and more.
Nine Types of Multi-rotors Supported:
Naza-M V2 now supports nine types of multi-rotor, which meets the different needs of the enthusiasts.
Quad I, Quad X;
Hexa I, Hexa V, Hexa Y, Hexa IY;
Octo X, Octo I, Octo V; ( Naza-M V2 does not support the aircraft which has large vibration, so when you choose to use hexa-rotor or octo-rotor, please pay attention to the vibration situation and try to do some vibration dampening);
Multiple Flight Control Modes/Intelligent Switching
It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger.
GPS Module Available/Accurate Position Hold
The plug and play GPS module will greatly enhance the performance for Aerial Photography with Position Hold, Return-To-Home and Intelligent Orientation Control functions. With the GPS Module, the multi-rotor will have position and altitude locked even in windy conditions. Hovering accuracy is approximatley 2.5m horizontal and 0.8m vertical.
Intelligent Orientation Control
Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:
In course lock flying, the forward direction is the same as a recorded nose direction.
In home lock flying, the forward direction is the same as the direction from home point to multi-rotor.
Enhanced Failsafe Mode
If your transmitter supports failsafe, then you can set failsafe through port-U. Naza controller has built-in auto level failsafe function, which means when the communication between MC and the transmitter is disconnected, the outputs of all command sticks from controller will go to center position. If the GPS module is used, you can also set RTH on failsafe. If your transmitter has only 4 channels, then MC will work in Atti. Mode by default without the failsafe function.
Two Levels of Low Voltage Protections:
In order to prevent your multi-rotor from crashing or other harmful consequences caused by low battery voltage, we have designed two levels of low voltage protection. You can choose not to use this, however we strongly recommend you to enable the protection. Both levels of protection have LED warning as default. The first level will blink the red light continuously; the second level will blink red light continuously and the multi-rotor will descend and land. In manual mode when low voltage protection is triggered the LED warning will be active only.
Motor Arm and Motor Dis-arm
When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors.
Motor Disarm: There are two modes of Motor Disarm: namely Intelligent Mode and Immediate Mode.
Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience and supports double spring TX; every time you let go of the throttle stick it will hover.
PPM, S-BUS & Ordinary Receiver Supported:
Minimum Four channel receiver supported, also PPM and Futaba S-Bus receiver supported. PPM & S-Bus receivers (the general use of the first 8 channels of S-Bus receiver) to optimize the channel connection, the A, E, T, R, U five-channel functions are set using channel X2, use only one servo cable to connect the PPM or S-Bus to X2, this makes installation quick and easy, not easy to make mistakes.
2-Axis Camera Gimbal Stabilization:
The built-in camera gimbal stabilization module is compatible with almost all 2-axis gimbal systems. This system will automatically adjust the camera gimbal according to the attitude of the multi-rotor.
Upgrade-able and Expandable:
The Firmware in the Naza controller can easily be upgraded with the included USB cable when newer versions become available. An expansion port also allows for use of future additional modules.
- Supported Configurations ......... Quad X, Quad +, Hex X and Hex +
- Maximum ESC Rate ................. 400 Hz
- Naza Controller Voltage Range . 4.8 to 5.5 V
- Voltage Monitor Input Range .... 7.2 to 26.0 volts (2S-6S Lipo)
- Normal Power Consumption ..... 0.12A @ 5 volts
- Maximum Power Consumption . 0.30A @ 5 Volts
- Operating Temperature ........... -10 to +50C (14 to 122 F)
- Naza Controller Dimensions ..... 45.5 x 31.5 x 18.5 mm
- Naza Controller Dimensions ..... 1.79 x 1.24 x 0.73 in
- Voltage Unit Dimensions .......... 32.2 x 21.1 x 7.7 mm
- Voltage Unit Dimensions .......... 1.27 x 0.83 x 0.30 in
- Naza Controller Weight ............ 25 gm (0.88 oz)
- Voltage Unit Weight ................. 20 gm (0.71 oz
For the latest available Firmware and DJI Assistant Software please visit the DJI Naza Information Page.