$18.00

FeatherLight DSMX Compatible 6-Channel Rx + Satellite
[LEMCH6X+Sat]

Are You Tired Of Paying For Over Priced Receivers?
DSMX Compatible 6-Channel Rx + Satellite


The ultimate 2.4GHz receiver for any of your favorite models from mini profile foamies to BIG Gassers, The Feather Light Full Range Receiver uses advanced DSMX™ technology that makes it compatible with DSM2™ & DSMX radio and module systems.

    Key Features
  • Modern DSMX Technology
  • Super lightweight 4.8 grams
  • DSM2™ technology
  • Compatible with DSM2™ & DSMX radio and module systems
  • 6 Channel Full Range Receiver
  • Short 29mm antennas for mounting convenience
  • 23(L) x 18(W) x 11(H) mm
  • FailSafe for all channels via press of a button
    Binding Instruction:
  1. The Spektrum compatible receiver will work without the satellite if you prefer a more compact installation.
  2. Install Binding Jumper on receiver's binding pins.
  3. Connect power to receiver.
  4. Receiver's LED will begin rapid flashing.
  5. While holding down the bind button or switch on the transmitter;
    • Turn on transmitter
    • Hold bind button or switch until receiver pauses and begins a slow flash and then lights up solid red.
    • Release binding switch or button.
  6. Verify proper bind with receiver.
  7. Remove binding plug
  8. Power off receiver and transmitter.
    FailSafe Binding Instructions:
  1. Start by binding the receiver to the transmitter in the normal way.
  2. Proceed as follows to set failsafe (see video: https://www.youtube.com/watch?v=FyW1v12dv_k)
    1. Ensure that transmitter and receiver are turned on.
    2. Insert bind plug into the receiver (Note: to set failsafe, bind plug is applied only when the receiver is turned on).
    3. Set transmitter controls to the desired failsafe positions.
    4. Press the side pushbutton to memorize failsafe settings.
    5. Observe that the green light at the end of the receiver turns on to indicate failsafe is set. (Repeat step 4 will cause the LED to turn off which means failsafe is disabled).
    6. Remove bind plug.
  3. Disconnect the power for at least 2 seconds and then reconnect the power again.
  4. Test failsafe by turning off the transmitter.
    1. Complete user manual for download (PDF):
      Click to download Manual.pdf

Reviews

Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Manufacturer Info
GorillaBobs Homepage
Other products